Get strong and long-lasting bonds with the Gorilla Heavy Duty White Grab Adhesive, a flexible and gap-filling formula suitable for various DIY projects. This ultra-high strength adhesive is easy to use, 100% waterproof, and temperature-resistant, making it perfect for indoor and outdoor applications.
ULTRA HIGH STRENGTH: GORILLA Grab Adhesive grabs virtually anything instantly. Heavier objects may require support. The flexible, gap filling formula provides a long-lasting, heavy-duty bond. even easier to use - no cartridge gun needed.
ALL PURPOSE: GORILLA Grab Adhesive can be used on a variety of DIY projects such as wall partitioning, bathrooms, kitchens, moulding, stone work, panelling, worktops, landscaping (including decking), flooring (including laminate) & more!
INDOOR & OUTDOOR USE: GORILLA Grab Adhesive is perfect for indoor and outdoor projects due to being able to withstand extreme temperatures, bond underwater and being 100 Percent waterproof.
GAP FILLING: This handy 200ml tube provides a long-lasting heavy-duty bond and the ability to fill gaps. This easy-to-use, flexible formula can be used on a variety of surfaces, holding instantly with a high strength bond.
FOR USE ON: The all-purpose way to bond building materials; it will grab virtually anything instantly. It can be used on wood, metal, stone, ceramic, glass, plastics (apart from polypropylene (PP) or pol hylene (PE) plastics), brick & concrete.
A must-have for DIY enthusiasts and crafty individuals, this Gorilla Epoxy is a strong and versatile adhesive. With its crystal-clear finish and 5-minute setting time, it's perfect for various projects, from woodworking to jewelry making. The easy-to-use syringe dispenser and durable construction make it a practical and reliable choice for any crafting or repair project.
DRIES CRYSTAL CLEAR: Ensuring a spotless finish whatever the project
GAP FILLING: Fills gaps and bonds uneven surfaces
5 MINUTE SET TIME: Gives ample time to reposition for the perfect fit
WATER RESISTANT: Withstands moderate exposure to water
EASY TO USE SYRINGE: Syringe dispenses even amounts of resin & hardener
PREPARATION: All surfaces to be bonded should be clean and dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Ensure your work area is well-ventilated and protected from spills. Remove stir stick from middle of plunger. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.
DISPENSE & MIX: Dispense resin and hardener onto clean, disposable surface ensuring both flow equally. Even amounts of resin and hardener can then be dispensed into a disposable mixing tray. The package blister can be used as a mixing tray. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up – this is a reaction that occurs as the resin and hardener combine.
APPLY & GRIP: Apply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. Remove any excess glue immediately from project surface with a dry cloth. GRIP: To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes. Full cure achieved in 24 hours.
WHY HAS MY EPOXY NOT SET? Epoxies are made of two liquid components, a resin and a hardener. When the hardener and resin are mixed equally, the bond will be extremely strong and permanent. If the adhesive has not set it may be because the resin and hardener were not mixed in equal quantities – to ensure even distribution point tip upwards so the air bubble start to disperse and eliminate air by slowly pushing plunger until both resin and hardener are at the tip.
NOTE: Gorilla Epoxy works well on many types of plastic (roughen surfaces prior to gluing), but is not recommended for use on PVC pipe, polyethylene (PE) and polypropylene (PP) plastic, or certain types of rubber with high oil or plasticiser content. If you would like more information on how Gorilla Epoxy bonds to specific substrates, please contact our technical team via the ‘Contact Us’ section on the website for assistance.
This heavy-duty grab adhesive is perfect for indoor and outdoor projects, featuring a 100% waterproof and temperature-resistant design. Its easy-to-use formula and gap-filling capabilities make it great for a variety of applications, from crafting to home repairs.
100% WATERPROOF: Even bonds under water.
TEMPERATURE RESISTANT:Withstands extreme heat and cold.
GAP FILLING: Fills voids with little or no shrinkage.
EASY TO USE: Flexible paintable, fast grab formula.
Perfect for DIY enthusiasts and homeowners who want a strong and reliable adhesive. This grab adhesive features a crystal clear formula, waterproof design, and extreme temperature resistance. It's ideal for heavy-duty applications, such as panelling, moulding, and landscaping.
GORILLA'S STRONGEST GRAB: Gorilla Max Strength Grab Adhesive is 5x Stronger than Gorilla Heavy Duty Grab Adhesive, ideal for even the toughest jobs and repairs.
CRYSTAL CLEAR: This ultra-high strength formula dries crystal clear for a virtually invisible bond. It’s Gorilla tough, every time.
100% WATERPROOF: This versatile formula bonds both indoors and out, even underwater ! Offering heavy duty adhesion wherever you need it.
WITHSTANDS EXTREME TEMPERATURES: Gorilla Max Strength Grab Adhesive withstands extreme temperatures for an extra-tough bond that’ll last.
ALL SURFACE - ALL PURPOSE: Ideal for a variety of DIY projects including panelling, moulding, bathrooms, kitchens, worktops, landscaping, flooring & more!
" Not recommended for use on polyethylene (PE), polypropylene (PP), bitumen or non-stick surfaces. 5x stronger compared to Gorilla Heavy Duty Grab Adhesive. Not for use within aquariums. "
